State-of-the-Art Measurement Analysis Software, Training and Consulting Services

¬Celebrating over 25 YRS of Excellence and Innovation 1987-2012

    Google 
internet isgmax.com
 

 Products    Books Steam Distribution & Metering

 

Steam Distribution & Metering Book (4th Edition)

 

Order Online                 Order by FAX

 

This professional short course book ($95 USD) offered by Integrated Sciences Group covers the basic concepts of steam generation, two-phase steam properties, and flow of steam through surface lines, pipe tees and control valves. It also includes a comprehensive, up-to-date review of steam flow splitting, rate control and metering devices used in the petroleum industry. Guidelines are presented for selecting the appropriate methods and devices for improving steam distribution and designing a cost effective monitoring program.

 

This book is designed for facility, reservoir, and production engineers currently responsible for the design, implementation and management of steamflood or cyclic steam stimulation projects.  However, the contents of this book are also beneficial for field supervisors responsible for steam plant operation and other technical personnel involved in the monitoring and evaluation of steamflood or cyclic steam stimulation projects.

 

Table of Contents

  • Chapter 1 - Introduction

  • Chapter 2 - Steam Generation

  • Chapter 3 - Steam Distribution

  • Chapter 4 - Steam Metering

  • Chapter 5 - System Optimization

  • Appendix

Chapter 2 - Steam Generation

Chapter 2 covers basic steam generation concepts and the thermodynamic properties of two-phase steam.

 

Basic Generator Operation
Conventional Units
Co-generation Units
Generator Plant Design Criteria

Two-Phase Steam Properties
Pressure and Temperature
Quality
Specific Volume and Density
Total and Internal Energies
Enthalpy

Generator Efficiency
Combustion of Hydrocarbon Fuels
Flue Gas Analysis
Steam Effluent Analysis
Tubing Scale

 

Chapter 3 - Steam Distribution

Chapter 3 provides a comprehensive review of two-phase steam flow through surface lines, pipe tees and control valves.

 

Two-Phase Flow Regimes
Vertical Pipes
Horizontal Pipes
Flow Regime Maps

Rate Control
Critical Flow Principles
Adjustable Chokes
Straight-Bore Chokes

Pressure Loss
Basic Flow Equations
Empirical Correlations

Heat Loss
Governing Equations
Heat Transfer Mechanisms
Sample Calculations

Pipe Sizing Guidelines

Flow Splitting at Pipe Tees
Side-branching Tees
Reduced Side-branch Diameter Tees
Impacting Tees

 

Chapter 4 - Steam Metering

Chapter 4 reviews the basic operating principles of steam metering equipment that has been or is currently being used in the petroleum industry.

 

Flow Rate Measurement
Orifice Plates
Critical Flow Chokes

Steam Quality Measurement
Densitometer
Radiation Detectors
Dielectric Sensor

Combined Rate and Quality Measurement
Dual-Orifice and Orifice-Choke
SteamScan Device
Separator Vessel

 

Chapter 5 - System Optimization

Chapter 5 covers recent advances for improved two-phase flow splitting and rate control.  A set of basic guidelines for improving steam distribution systems is also discussed.

 

Practical Considerations

Modified Pipe Tees
Side-branching Tees
Impacting Tees

Recommended Guidelines
Flow Splitting
Flow Control
Steam Monitoring

Tapered-Bore Chokes
Pressure Recovery Process
Critical vs Subcritical Flow
Calculated vs Measured Rates

 
 
 

The Author

Ms. Suzanne Castrup has over thirty years of experience in thermally enhanced oil recovery.  Prior to joining Integrated Sciences Group, Ms. Castrup was Technical Advisor for Thermally Enhanced Oil Recovery in Chevron’s Western Basins Group providing expert consultation on all aspects of steamflood and cyclic steam project design, implementation and evaluation.  She was also a Production/Reservoir Engineer, managing both cyclic steam stimulation and steamflood projects in several heavy oil properties in the Cymric and Midway Sunset Fields. 

 

An expert in heat management, Ms. Castrup spent eleven years as a Research Engineer at Chevron Oil Field Research Company conducting laboratory and field experiments to better understand surface and subsurface heat management processes.  She has published numerous technical papers and holds several patents relating to heavy oil recovery.  She is a recipient of the 2006 SPE Western Region Award and the 2007 SPE International Award for distinguished contributions to petroleum engineering projects, facilities and construction. Click Here for a list of professional accomplishments.

 

 

  Home  |  Company  |  Products  |  Services  |  Training  |  Updates  |  Freeware  |  Articles  |  Help  |  Links 

 

Integrated Sciences Group
14608 Casitas Canyon Road • Bakersfield, CA 93306
Phone 1-661-872-1683 • FAX 1-661-872-3669

 

Privacy Policy     Return Policy     Shipping Info

 

Page Updated January 31, 2012